I always found this type works best when the filter is stuck -- Hokie in CT 07/21/2021 11:25AM Yeap, that is what ultimately got it. -- chemhokie 07/21/2021 11:48AMInsert a Link
Enter the title of the link here:
Enter the full web address of the link here -- include the "http://" part:
Enter the full web address of the link here -- include the "http://" part:
|
Current Thread:
|
I always found this type works best when the filter is stuck -- Hokie in CT 07/21/2021 11:25AM Yeap, that is what ultimately got it. -- chemhokie 07/21/2021 11:48AM Screwdriver always works ** -- typed by ben 07/21/2021 05:27AM That's what I heard, but it was actually tearing the metal. ** -- chemhokie 07/21/2021 11:24AM Do you have a toothbrush?? OK, I kid ** -- DonHo-kieHi 07/20/2021 7:19PM I wonder if it is at all possible it was cross-threaded. -- Riverguy 07/20/2021 7:06PM Probably not -- EDGEMAN 07/20/2021 8:22PM I finally gave in and removed the alternator -- chemhokie 07/20/2021 7:51PM Picture? ** -- EDGEMAN 07/20/2021 8:22PM Before -- chemhokie 07/20/2021 8:33PM After -- chemhokie 07/20/2021 8:36PM Do you have a wrench with teeth, like this? -- EDGEMAN 07/20/2021 8:46PM That was what crushed the end of it. -- chemhokie 07/20/2021 9:08PM I've also used this on stubborn oil filters -- EDGEMAN 07/20/2021 8:47PM Yeah, that's the thing. It is literally the only thing I haven't bought. ** -- chemhokie 07/20/2021 9:22PM Tape an m-80 to that thing... -- Riverguy 07/20/2021 10:45PM Got it finally. ** -- chemhokie 07/20/2021 11:33PM How? What'd it take? -- Riverguy 07/21/2021 11:35AM The pliers type tool. See newer thread above with tool and mangled filter. ** -- chemhokie 07/21/2021 11:51AM In the future, you might have luck with those metal caps that fit over... -- EDGEMAN 07/21/2021 05:20AM That was what I used to "snug" the new one up. ** -- chemhokie 07/21/2021 11:21AM That should work when you remove the new filter. -- EDGEMAN 07/21/2021 11:49AM Or possibly -- EDGEMAN 07/21/2021 05:28AM Something like this? -- EDGEMAN 07/20/2021 8:37PM I've never understood oil filter wrenches like that -- Tafkam Hokie 07/21/2021 09:26AM I have one and even with the alternator out there is barely room for -- chemhokie 07/20/2021 8:39PM Wonder if a dealership installed the filter -- EDGEMAN 07/20/2021 6:52PM I once had to cut a small hole in the rubber trim beneath the inside of the -- vt90 07/20/2021 5:54PM I had to resort to the screw driver method once. It worked. -- RichwebHokie 07/20/2021 5:45PM Where are you located physically? ** -- ElbertoHokie 07/20/2021 5:31PM Saint Louis ** -- chemhokie 07/20/2021 6:34PM # Broadwayoysterbar ** -- astrohokie 07/20/2021 7:22PM As some who live in STL, I naturally avoid downtown at all costs. -- chemhokie 07/21/2021 5:01PM Just take it to “the man”. ** -- Femoyer Hokie 07/20/2021 5:29PM Red? ** -- FfxStationHokie 07/20/2021 5:35PM Yeah, that guy. ** -- Femoyer Hokie 07/20/2021 5:36PM Did you try turning it the opposite direction? ** -- ronvpi 07/20/2021 5:27PM Yeah, between trying to get to it from above and then switching to -- chemhokie 07/20/2021 6:36PM So you tightened it more? ** -- Hokie`79 07/20/2021 10:29PM Unlike George, it didn't move. ** -- chemhokie 07/20/2021 11:14PM TWSS ** -- LonghornHokie 07/20/2021 5:37PM Amputate? ** -- FfxStationHokie 07/20/2021 5:26PM Well, that's what I'm trying to do, but I want a clean cut. ** -- chemhokie 07/20/2021 6:39PMTech Sideline is Presented By:
Our Sponsors
