Typically squeezing the metal wire type pieces together on each side

should allow you to remove the ends from the recessed housing. Then you should be able to remove the outer cover and access the bulb.

[Post edited by scoop76cs at 12/28/2020 4:30PM]

In response to this post by VTizzle

Posted: 12/28/2020 at 4:23PM

Any electricians or handy guys that know how to change this light bulb? -- VTizzle 12/28/2020 3:23PM

This post raises the question... -- Hokie in CT 12/28/2020 11:56PM

Thanks all! Finally got it. Next up: Putting frost film over window.** -- VTizzle 12/28/2020 5:01PM

Video aqui... -- Vtskier1 12/28/2020 4:54PM

Typically squeezing the metal wire type pieces together on each side -- scoop76cs 12/28/2020 4:23PM

Delete** -- scoop76cs 12/28/2020 4:23PM

Yes, need to push the pins in near top to release mechanism -- FfxStationHokie 12/28/2020 3:31PM

The pins hold the whole thing, but afterward do I twist it to open? -- VTizzle 12/28/2020 3:37PM

I think it comes apart might rotate - can't remember exactly -- FfxStationHokie 12/28/2020 4:09PM

You were right. Must be first time it was taken out a long time. Got it. -- VTizzle 12/28/2020 5:00PM

Typically squeezing the metal wire type pieces together on each side

Insert a Link

Tech Sideline is Presented By:

Our Sponsors