All Hokie, All the Time. Period. Presented by

The Lounge Board

Joined: 09/05/2005 Posts: 29111
Likes: 7211

25000+ Posts

Board Member 15+ Years

5000 Likes

2000 Likes

100 Likes

100 Likes

What's this?

Just do the whole thing while you are there. Doesn't cost much or take

much extra time. Just make sure you seal it well with some plumber's putty. If it isn't rusted completely over like my ridiculous project last year, it shouldn't take you much longer than an hour to do.
[Post edited by hoosnowahokie at 01/05/2021 3:11PM]

(In response to this post by Brown Water)

Link: My fun replacement

Posted: 01/05/2021 at 3:10PM

+0

PREV NEXT REPLY

Insert a Link

Enter the title of the link here:

Enter the full web address of the link here -- include the "http://" part:

Current Thread:

Replacing the garbage disposal today. Do I need to replace the flange or -- Brown Water 01/05/2021 2:13PM

I didn't replace it, but did need to reseat it when I did mine -- HokieDevil 01/05/2021 3:22PM

Good point ** -- Brown Water 01/05/2021 3:23PM

Just do the whole thing while you are there. Doesn't cost much or take -- hoosnowahokie 01/05/2021 3:10PM

But... -- MAHokie69 01/05/2021 4:48PM

Just don't replace the dishwasher it could cause problems...fixed -- Major Kong 01/05/2021 2:47PM

I'm guessing that a pretty good pic, wherever it is ** -- Brown Water 01/05/2021 2:49PM

The picture thingy posting from your PC must be FUBARed. ** -- Major Kong 01/05/2021 2:52PM

Whoop, there it is. I was right. ** -- Brown Water 01/05/2021 3:00PM

Don't forget the adjustable spanner.Great choice!** -- MAHokie69 01/05/2021 2:41PM

Stop! You're paying him... ** -- RTFC 01/05/2021 3:27PM

Kept mine from old one on new one, no issues ** -- HokieForever 01/05/2021 2:28PM

Yes ** -- FfxStationHokie 01/05/2021 2:27PM

If not leaking, purely an aesthetic decision -- Vienna_Hokie 01/05/2021 2:26PM

Clarkman? ** -- Stork 01/05/2021 2:24PM

Guess I need to dismantle the latch hasp from the aux drainage line -- Brown Water 01/05/2021 2:32PM

Arrgh, already discussed.** -- `lag 01/05/2021 2:24PM

And too lazy to go down and look at mine ** -- `lag 01/05/2021 2:26PM

Keep the existing flange, unless it's appearance is crap. Changing the -- BayHokie 01/05/2021 2:22PM

Thanks BH ** -- Brown Water 01/05/2021 2:22PM

You may want to have one on hand, unless you live near a plumbing store -- EDGEMAN 01/05/2021 2:20PM

Comes with the kit but the bastiges don't include the plumber's putty ** -- Brown Water 01/05/2021 2:22PM

That's cheap enough to have on hand. Definitely buy that before starting! -- EDGEMAN 01/05/2021 2:35PM

...won’t drain your wallet ?** -- chumley 01/05/2021 2:38PM

I dunno - it sounds like a trap! ** -- Hokie360 01/05/2021 3:05PM

It’s all ball bearings these days. ** -- BobG 01/05/2021 2:16PM