You don't want the cylinders bathed in oil though, vehicles would smoke

like crazy. The wear occurs more once the temps pick up so the start up is not horrible on a vehicle, esp. these days. You get the damage if your oil is low or not circulating well and the heat and friction cause the damage.

In response to this post by HokieDan95

Posted: 03/21/2018 at 12:59PM

Gear head question: supposedly most engine wear occurs at start up -- HokieDan95 03/21/2018 12:34PM

Don't forget that zink has also been removed, or seriously reduced from oil -- EDGEMAN 03/21/2018 1:30PM

You don't want the cylinders bathed in oil though, vehicles would smoke -- fordham 03/21/2018 12:59PM

That's why you want good valve seals and piston rings. -- EDGEMAN 03/21/2018 1:18PM

Pistol rings? You'll shoot your eye out! ** -- R J Reynolds 03/21/2018 1:43PM

Ouch! :) ** -- EDGEMAN 03/21/2018 2:15PM

I'm thinking tolerances have improved tremendously... -- `lag 03/21/2018 12:48PM

Some of that oiling relies on rotation to cover the wear surface -- typed by ben 03/21/2018 12:42PM

The cylinder walls and piston pins are lubricated by "flung" oil and thus -- Hokie360 03/21/2018 12:40PM

I think the wear is minimal, and with the use of synthetic oils... -- EDGEMAN 03/21/2018 12:38PM

You don't want the cylinders bathed in oil though, vehicles would smoke

Insert a Link

Tech Sideline is Presented By:

Our Sponsors